Sistemi di controllo
Controllers 		www.laserent.comHome Per maggiori informazioni, utilizzate questo MODULO.
You can contact us by filling in this FORM.
Pangolin Lasershow Designer 2000  

E' il sistema professionale "Stato dell'Arte" e più diffuso al mondo (oltre 6.000 utilizzatori) ideale per tutte le applicazioni in cui è necessario un potente software per realizzare in proprio, o per riprodurre qualsiasi lasershow di grafica animata 2D e 3D e dei tipici effetti volumetrici 3D,

perfettamente sincronizzati alla relativa colonna sonora o a qualsiasi altro media ed effetto scenotecnico (audio, video, luci, proiezioni, effetti speciali, schermi di ogni tipo, pirotecnici, ecc. ecc.)Il sistema è composto da una scheda hardware e del relativo software per PC in ambiente Windows.

Disponibile in tre differenti versioni scalabili: Intro, Basic e Professional viene fornito con oltre 75 show d'archivio e oltre 120.000 clip arts / grafiche laser.
Scheda Pangolin QM 2000 con relativo Cd-Rom Driver x software Pangolin LD 2000
Viste schermate del programma LD 2000:

Lasershow Design: per creare immagini, loghi, scritte e disegni grafici Showtime: editing sequenze, effetti e sincronizzazione show alla timeline Live!: controllo manuale di proiezioni, singoli effetti o sequenze mediante tasti personalizzabili dall'utente Live Pro!: potente controllo manuale per show ed effetti "live" multicanale, in discoteca o altri spettacoli dal vivo

 

Pangolin Lasershow Performer Consolle:

Optional, per controllo esterno di proiezioni grafiche o effetti live
e/o intere sequenze, mediante tasti e controllabile dalla partre "Live"
del software PangolinLD2000

Pangolin SMPTE time code controller interface
(retro e fronte)
Avatar Laser Controller
   

Centralina di controllo per sistemi laser, ideale per utilizzo in club e discoteche ed impieghi "Live", di facilissimo apprendimento grazie ad un'interfaccia uomo-macchina studiato da un team di psicologi!

Permette un facile e veloce utilizzo del Vs. sistema laser con funzione manuale, automatico, sequenziale o musicale con microfono incorporato per funzionare sulla battuta della musica del Vs. locale.

Può anche realizzare scritte direttamente dalla tastiera e modificare gli effetti in memoria.


Gli effetti ed animazioni presenti in memoria possono essere rinnovati e/o sostituiti mediante Memory Flash Card interfacciabili con apposito software o con software Mamba Black e/o Pangolin e possono essere importati files in diversi formati tipo Ilda,m Mamba, Laserpainter, ecc., supporta anche il segnale DMX
La versione Avatar Professional offre il sistema "SMS 2 laser" incluso
Disponibile in tre diverse versioni: Lite, Classic e Professional

A complete laser control system in 19" format with very easy user interface, unbelievable features and ground braking price ratio - this is Avatar LCC system with double processor and L-COS® operating system. 

Sophisticated technique from Germany. A team of 4 developers worked for almost 2 years on concept and realization of the LCC Avatar. The ability for simple updates is also included, as an extensive manual is (for those who really need it). Additional online support is available.
All circuits and mechanical components are manufactured in Germany, and assembled at the MediaLas facilities. During this process, each unit passes five different testing procedures, including burn-in. Every out-of-the-row function can be eliminated in the beginning.  The LCC memory grows with your demands.

In it´s basic configuration, 64MB of memory are available. By usage of fast CF memory cards, an extension of up to 512 MB is possible - with a simple exchange of cards. Thus, more than 1 million different frames can be stored in the LCC´s memory - enough for more than 9 hours of playback at 15 frames per second without any repetition. 

The output of the LCC Avatar is equivalent to ILDA´s standard, and therefore compatible to thousands of projectors all over the world. An afterwards supplement of existing lasershow systems is easy to maintain. Additionally, the power supply uses multi voltage and frequency inputs for all power sources worldwide.
Each Avatar contains the CF-maintenance software, which allows to import all kinds of standard laser graphic formats, such as ILDA, Mamba, Mamba Black, LaserPainter, etc
Software "Mamba Black"
   
Kinds of standard laser graphic formats, such as ILDA, Mamba, Mamba Black, LaserPainter, etc
Medialas Mamba Black:

Sistema di costi contenuti, semplice e di veloce apprendimento, è ideale per chi vuole avvicinarsi ad un sistema
di programmazione e riproduzione di lasershow, di facile utilizzo ed economico, in ambiente PC Windows / open hardware concept
Permette altresì di sincronizzare gli effetti laser alla relativa colonna sonora in qualsiasi formato
viene fornito con 10 show d'archivio

 

Now with 10 free Laser shows included!
Mamba Black is the new, hot lasershow software, programmed in open hardware concept. Mamba is not limited to any output card or specific hardware, and is compatible to most existing DACs, such as Riya PCI, Riya USB, QM2000, PCI12, even very low cost 8bit parallel DACs. The very intuitive user interface offers all necessary features for perfect shows. Unlimited numbers of tracks offer incredible capabilities for synchronizing your lasers to almost any music format. By using virtual projectors (ViPro), Mamba can be reformatted to any new location within seconds. Each ViPro offers geometric correction, blanking and scanner setup, individual color time shifting, and unlimited number of laser projectors.
The multi-functional timeline offers unlimited number of tracks, while each track can hold unlimited number of effects. Scenes can be moved from track to track by drap and drop. Highlight: All manipulations are visible in realtime on the timeline and on the preview window!
There is much much more to say about Mamba, but a very sensational feature is the fully object oriented frame editor. Edit your text at any time, move each single object within the show, you can even edit and change frames during a running laser show! Import and export of most existing standard frameformats is included.
The brandnew USB interface for all Mamba software versions. Fast data rate up to 8 MBit/s. Output speed up to 50,000pps ILDA. Standard ILDA connector, seriell interface for options. Very good price/performance ratio!

 
Technical data
Internal resolution for XY: 32bit per channel
External resolution for XY: Max. 16 bits per channel
Resolution RGB - Outputs: 8 bits per channel
Number of tracks on timeline: Unlimited
Number of frames: Unlimited
Number of open framelists:Unlimited
Number of projectors per computer:Unlimited
USB support:Fully, runs on standard notebook with USB port
Output speed:1000 to 150.000 pps
Editor object oriented: Fully, including text features
Bitmap Tracing: Yes
Realtime preview on timeline: Yes
Realtime preview in preview window: Yes
Realtime output to laser: Yes
Recommended hardware: 1,5 GHz, 256MB, 1024x768 Monitor, USB 2.0, Mouse
Fitting interface boards: PCI 12, DAP 12, Riya Pro, Riya USB, QM2000

Mamba Black manual

USB Black Box:
High speed USB interface for Mamba and Mamba Black. Transfer up to
1MB per second ensures a very smooth and fast output of up to 50,000
pps. ILDA output connector with full XY, blank and RGB.
00laserlogo-ss.jpg - 2783 Bytes
Copyright © 2001 Laser Entertainment srl. All rights reserved.
Immagini e dati non possono essere utilizzati senza il consenso di Laser Entertainment srl, Milano.
www.laserent.com